ArduinoStuff

arduino stuffs

main 2Branches 0Tags

Clone

HTTPS

SSH

Open with VS Code

Diffstat (limited to 'libraries/Firmata/examples/StandardFirmataWiFi/wifiConfig.h')

-rw-r--r--

libraries/Firmata/examples/StandardFirmataWiFi/wifiConfig.h

240

1 files changed, 0 insertions, 240 deletions

diff --git a/libraries/Firmata/examples/StandardFirmataWiFi/wifiConfig.h b/libraries/Firmata/examples/StandardFirmataWiFi/wifiConfig.h
deleted file mode 100644
index bedc744..0000000
--- a/libraries/Firmata/examples/StandardFirmataWiFi/wifiConfig.h
+++ /dev/null

@@ -1,240 +0,0 @@

-/*==============================================================================

- * WIFI CONFIGURATION

- *

- * You must configure your particular hardware. Follow the steps below.

- *

- * By default, StandardFirmataWiFi is configured as a TCP server, to configure

- * as a TCP client, see STEP 2.

- *============================================================================*/

-// STEP 1 [REQUIRED]

-// Uncomment / comment the appropriate set of includes for your hardware (OPTION A, B or C)

-// Arduino MKR1000 or ESP8266 are enabled by default if compiling for either of those boards.

-/*

- * OPTION A: Configure for Arduino MKR1000 or Arduino WiFi Shield 101

- *

- * This will configure StandardFirmataWiFi to use the WiFi101 library, which works with the

- * Arduino WiFi101 shield and devices that have the WiFi101 chip built in (such as the MKR1000).

- * It is compatible with 802.11 B/G/N networks.

- *

- * If you are using the MKR1000 board, continue on to STEP 2. If you are using the WiFi 101 shield,

- * follow the instructions below.

- *

- * To enable for the WiFi 101 shield, uncomment the #define WIFI_101 below and verify the

- * #define ARDUINO_WIFI_SHIELD is commented out for OPTION B.

- *

- * IMPORTANT: You must have the WiFI 101 library installed. To easily install this library, open

- * the library manager via: Arduino IDE Menus: Sketch > Include Library > Manage Libraries > filter

- * search for "WiFi101" > Select the result and click 'install'

- */

-//#define WIFI_101

-//do not modify the following 11 lines

-#if defined(ARDUINO_SAMD_MKR1000) && !defined(WIFI_101)

-// automatically include if compiling for MRK1000

-#define WIFI_101

-#endif

-#ifdef WIFI_101

-#include <WiFi101.h>

-#include "utility/WiFiClientStream.h"

-#include "utility/WiFiServerStream.h"

- #define WIFI_LIB_INCLUDED

-#endif

-/*

- * OPTION B: Configure for legacy Arduino WiFi shield

- *

- * This will configure StandardFirmataWiFi to use the original WiFi library (deprecated) provided

- * with the Arduino IDE. It is supported by the Arduino WiFi shield (a discontinued product) and

- * is compatible with 802.11 B/G networks.

- *

- * To configure StandardFirmataWiFi to use the legacy Arduino WiFi shield

- * leave the #define below uncommented and ensure #define WIFI_101 is commented out for OPTION A.

- */

-//#define ARDUINO_WIFI_SHIELD

-//do not modify the following 10 lines

-#ifdef ARDUINO_WIFI_SHIELD

-#include <WiFi.h>

-#include "utility/WiFiClientStream.h"

-#include "utility/WiFiServerStream.h"

- #ifdef WIFI_LIB_INCLUDED

- #define MULTIPLE_WIFI_LIB_INCLUDES

- #else

- #define WIFI_LIB_INCLUDED

- #endif

-#endif

-/*

- * OPTION C: Configure for ESP8266

- *

- * This will configure StandardFirmataWiFi to use the ESP8266WiFi library for boards

- * with an ESP8266 chip. It is compatible with 802.11 B/G/N networks.

- *

- * The appropriate libraries are included automatically when compiling for the ESP8266 so

- * continue on to STEP 2.

- *

- * IMPORTANT: You must have the esp8266 board support installed. To easily install this board see

- * the instructions here: https://github.com/esp8266/Arduino#installing-with-boards-manager.

- */

-//do not modify the following 14 lines

-#ifdef ESP8266

-// automatically include if compiling for ESP8266

-#define ESP8266_WIFI

-#endif

-#ifdef ESP8266_WIFI

-#include <ESP8266WiFi.h>

-#include "utility/WiFiClientStream.h"

-#include "utility/WiFiServerStream.h"

- #ifdef WIFI_LIB_INCLUDED

- #define MULTIPLE_WIFI_LIB_INCLUDES

- #else

- #define WIFI_LIB_INCLUDED

- #endif

-#endif

-/*

- * OPTION D: Configure for HUZZAH

- *

- * HUZZAH with CC3000 is not yet supported, this will be added in a later revision to

- * StandardFirmataWiFi.

- * For HUZZAH with ESP8266 use ESP8266_WIFI.

- */

-//------------------------------

-// TODO

-//------------------------------

-//#define HUZZAH_WIFI

-// STEP 2 [OPTIONAL for all boards and shields]

-// If you want to setup you board as a TCP client, uncomment the following define and replace

-// the IP address with the IP address of your server.

-//#define SERVER_IP 10, 0, 0, 15

-// STEP 3 [REQUIRED for all boards and shields]

-// replace this with your wireless network SSID

-char ssid[] = "your_network_name";

-// STEP 4 [OPTIONAL for all boards and shields]

-// If you want to use a static IP (v4) address, uncomment the line below. You can also change the IP.

-// If the first line is commented out, the WiFi shield will attempt to get an IP from the DHCP server.

-// If you are using a static IP with the ESP8266 then you must also uncomment the SUBNET and GATEWAY.

-//#define STATIC_IP_ADDRESS 192,168,1,113

-//#define SUBNET_MASK 255,255,255,0 // REQUIRED for ESP8266_WIFI, optional for others

-//#define GATEWAY_IP_ADDRESS 0,0,0,0 // REQUIRED for ESP8266_WIFI, optional for others

-// STEP 5 [REQUIRED for all boards and shields]

-// define your port number here, you will need this to open a TCP connection to your Arduino

-#define SERVER_PORT 3030

-// STEP 6 [REQUIRED for all boards and shields]

-// determine your network security type (OPTION A, B, or C). Option A is the most common, and the

-// default.

-/*

- * OPTION A: WPA / WPA2

- *

- * WPA is the most common network security type. A passphrase is required to connect to this type.

- *

- * To enable, leave #define WIFI_WPA_SECURITY uncommented below, set your wpa_passphrase value

- * appropriately, and do not uncomment the #define values under options B and C

- */

-#define WIFI_WPA_SECURITY

-#ifdef WIFI_WPA_SECURITY

-char wpa_passphrase[] = "your_wpa_passphrase";

-#endif //WIFI_WPA_SECURITY

-/*

- * OPTION B: WEP

- *

- * WEP is a less common (and regarded as less safe) security type. A WEP key and its associated

- * index are required to connect to this type.

- *

- * To enable, Uncomment the #define below, set your wep_index and wep_key values appropriately,

- * and verify the #define values under options A and C are commented out.

- */

-//#define WIFI_WEP_SECURITY

-#ifdef WIFI_WEP_SECURITY

-//The wep_index below is a zero-indexed value.

-//Valid indices are [0-3], even if your router/gateway numbers your keys [1-4].

-byte wep_index = 0;

-char wep_key[] = "your_wep_key";

-#endif //WIFI_WEP_SECURITY

-/*

- * OPTION C: Open network (no security)

- *

- * Open networks have no security, can be connected to by any device that knows the ssid, and are

- * unsafe.

- *

- * To enable, uncomment #define WIFI_NO_SECURITY below and verify the #define values

- * under options A and B are commented out.

- */

-//#define WIFI_NO_SECURITY

-/*==============================================================================

- * CONFIGURATION ERROR CHECK (don't change anything here)

- *============================================================================*/

-#ifdef MULTIPLE_WIFI_LIB_INCLUDES

-#error "you may not define more than one wifi device type in wifiConfig.h."

-#endif

-#ifndef WIFI_LIB_INCLUDED

-#error "you must define a wifi device type in wifiConfig.h."

-#endif

-#if ((defined(WIFI_NO_SECURITY) && (defined(WIFI_WEP_SECURITY) || defined(WIFI_WPA_SECURITY))) || (defined(WIFI_WEP_SECURITY) && defined(WIFI_WPA_SECURITY)))

-#error "you may not define more than one security type at the same time in wifiConfig.h."

-#endif //WIFI_* security define check

-#if !(defined(WIFI_NO_SECURITY) || defined(WIFI_WEP_SECURITY) || defined(WIFI_WPA_SECURITY))

-#error "you must define a wifi security type in wifiConfig.h."

-#endif //WIFI_* security define check

-#if (defined(ESP8266_WIFI) && !(defined(WIFI_NO_SECURITY) || (defined(WIFI_WPA_SECURITY))))

-#error "you must choose between WIFI_NO_SECURITY and WIFI_WPA_SECURITY"

-#endif

-/*==============================================================================

- * WIFI STREAM (don't change anything here)

- *============================================================================*/

-#ifdef SERVER_IP

- WiFiClientStream stream(IPAddress(SERVER_IP), SERVER_PORT);

-#else

- WiFiServerStream stream(SERVER_PORT);

-#endif

-/*==============================================================================

- * PIN IGNORE MACROS (don't change anything here)

- *============================================================================*/

-#if defined(WIFI_101) && !defined(ARDUINO_SAMD_MKR1000)

-// ignore SPI pins, pin 5 (reset WiFi101 shield), pin 7 (WiFi handshake) and pin 10 (WiFi SS)

-// also don't ignore SS pin if it's not pin 10. Not needed for Arduino MKR1000.

-#define IS_IGNORE_PIN(p) ((p) == 10 || (IS_PIN_SPI(p) && (p) != SS) || (p) == 5 || (p) == 7)

-#elif defined(ARDUINO_WIFI_SHIELD) && defined(__AVR_ATmega32U4__)

-// ignore SPI pins, pin 4 (SS for SD-Card on WiFi-shield), pin 7 (WiFi handshake) and pin 10 (WiFi SS)

-// On Leonardo, pin 24 maps to D4 and pin 28 maps to D10

-#define IS_IGNORE_PIN(p) ((IS_PIN_SPI(p) || (p) == 4) || (p) == 7 || (p) == 10 || (p) == 24 || (p) == 28)

-#elif defined(ARDUINO_WIFI_SHIELD)

-// ignore SPI pins, pin 4 (SS for SD-Card on WiFi-shield), pin 7 (WiFi handshake) and pin 10 (WiFi SS)

-#define IS_IGNORE_PIN(p) ((IS_PIN_SPI(p) || (p) == 4) || (p) == 7 || (p) == 10)

-#elif defined(ESP8266_WIFI) && defined(SERIAL_DEBUG)

-#define IS_IGNORE_PIN(p) ((p) == 1)

-#endif