arduino stuffs
Diffstat (limited to 'libraries/RobotMotor/RobotMotor4wd/RobotMotor.cpp')
| -rwxr-xr-x | libraries/RobotMotor/RobotMotor4wd/RobotMotor.cpp | 82 |
1 files changed, 0 insertions, 82 deletions
diff --git a/libraries/RobotMotor/RobotMotor4wd/RobotMotor.cpp b/libraries/RobotMotor/RobotMotor4wd/RobotMotor.cpp deleted file mode 100755 index bdf2d1a..0000000 --- a/libraries/RobotMotor/RobotMotor4wd/RobotMotor.cpp +++ /dev/null @@ -1,82 +0,0 @@ -/******************************************************* - RobotMotor.cpp // Adafruit 4WD version - low level motor driver for use with adafruit motor shield and 4WD robot - - Motor constants used are defined AFMotor.h - - Copyright Michael Margolis May 8 2012 -********************************************************/ - -#include <Arduino.h> -#include <AFMotor.h> // adafruit motor shield library -#include "RobotMotor.h" - -const int differential = 0; // % faster left motor turns compared to right - -// tables hold time in ms to rotate robot 360 degrees at various speeds -// this enables conversion of rotation angle into timed motor movement -// The speeds are percent of max speed -// Note: low cost motors do not have enough torque at low speeds so -// the robot will not move below this value -// Interpolation is used to get a time for any speed from MIN_SPEED to 100% - -const int MIN_SPEED = 60; // first table entry is 60% speed -const int SPEED_TABLE_INTERVAL = 10; // each table entry is 10% faster speed -const int NBR_SPEEDS = 1 + (100 - MIN_SPEED)/ SPEED_TABLE_INTERVAL; - -int speedTable[NBR_SPEEDS] = {60, 70, 80, 90, 100}; // speeds -int rotationTime[NBR_SPEEDS] = {5500, 3300, 2400, 2000, 1750}; // time - -AF_DCMotor motors[] = { - AF_DCMotor(4, MOTOR34_1KHZ), // left front is Motor #4 - AF_DCMotor(3, MOTOR34_1KHZ), // right front is Motor #3 - AF_DCMotor(1, MOTOR12_1KHZ), // left rear is Motor #1 - AF_DCMotor(2, MOTOR12_1KHZ) // right rear is Motor #2 - }; - -int motorSpeed[2] = {0,0}; // left and right motor speeds stored here (0-100%) - -void motorBegin(int motor) -{ - motorStop(motor); // stop the front motor - motorStop(motor+2); // stop the rear motor -} - -// speed range is 0 to 100 percent -void motorSetSpeed(int motor, int speed) -{ - if( motor == MOTOR_LEFT && speed > differential) - speed -= differential; - motorSpeed[motor] = speed; // save the value - int pwm = map(speed, 0,100, 0,255); // scale to PWM range - - motors[motor].setSpeed(pwm) ; - motors[motor+2].setSpeed(pwm) ; -} - -void motorForward(int motor, int speed) -{ - motorSetSpeed(motor, speed); - motors[motor].run(FORWARD); - motors[motor+2].run(FORWARD); -} - -void motorReverse(int motor, int speed) -{ - motorSetSpeed(motor, speed); - motors[motor].run(BACKWARD); - motors[motor+2].run(BACKWARD); -} - -void motorStop(int motor) -{ - // todo set speed to 0 ??? - motors[motor].run(RELEASE); // stopped - motors[motor+2].run(RELEASE); -} - -void motorBrake(int motor) -{ - motors[motor].run(BRAKE); // stopped - motors[motor+2].run(BRAKE); -}
\ No newline at end of file |