bendns' repos / ArduinoStuff
arduino stuffs
Diffstat (limited to 'libraries/SD/src/utility/Sd2PinMap.h')
-rw-r--r--libraries/SD/src/utility/Sd2PinMap.h525
1 files changed, 0 insertions, 525 deletions
diff --git a/libraries/SD/src/utility/Sd2PinMap.h b/libraries/SD/src/utility/Sd2PinMap.h
deleted file mode 100644
index a07fcca..0000000
--- a/libraries/SD/src/utility/Sd2PinMap.h
+++ /dev/null
@@ -1,525 +0,0 @@
-/* Arduino SdFat Library
- Copyright (C) 2010 by William Greiman
-
- This file is part of the Arduino SdFat Library
-
- This Library is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with the Arduino SdFat Library. If not, see
- <http://www.gnu.org/licenses/>.
-*/
-#if defined(__arm__) // Arduino Due Board follows
-
-#ifndef Sd2PinMap_h
- #define Sd2PinMap_h
-
- #include <Arduino.h>
-
- uint8_t const SS_PIN = SS;
- uint8_t const MOSI_PIN = MOSI;
- uint8_t const MISO_PIN = MISO;
- uint8_t const SCK_PIN = SCK;
-
-#endif // Sd2PinMap_h
-
-#elif defined(__AVR_ATmega4809__) // Arduino UNO WiFI Rev2 follows
-
-#ifndef Sd2PinMap_h
- #define Sd2PinMap_h
-
- #include <Arduino.h>
-
- uint8_t const SS_PIN = SS;
- uint8_t const MOSI_PIN = MOSI;
- uint8_t const MISO_PIN = MISO;
- uint8_t const SCK_PIN = SCK;
-
-#endif // Sd2PinMap_h
-
-#elif defined(__AVR__) // Other AVR based Boards follows
-
-// Warning this file was generated by a program.
-#ifndef Sd2PinMap_h
-#define Sd2PinMap_h
-#include <avr/io.h>
-
-//------------------------------------------------------------------------------
-/** struct for mapping digital pins */
-struct pin_map_t {
- volatile uint8_t* ddr;
- volatile uint8_t* pin;
- volatile uint8_t* port;
- uint8_t bit;
-};
-//------------------------------------------------------------------------------
-#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-// Mega
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 20;
-uint8_t const SCL_PIN = 21;
-
-// SPI port
-uint8_t const SS_PIN = 53;
-uint8_t const MOSI_PIN = 51;
-uint8_t const MISO_PIN = 50;
-uint8_t const SCK_PIN = 52;
-
-static const pin_map_t digitalPinMap[] = {
- {&DDRE, &PINE, &PORTE, 0}, // E0 0
- {&DDRE, &PINE, &PORTE, 1}, // E1 1
- {&DDRE, &PINE, &PORTE, 4}, // E4 2
- {&DDRE, &PINE, &PORTE, 5}, // E5 3
- {&DDRG, &PING, &PORTG, 5}, // G5 4
- {&DDRE, &PINE, &PORTE, 3}, // E3 5
- {&DDRH, &PINH, &PORTH, 3}, // H3 6
- {&DDRH, &PINH, &PORTH, 4}, // H4 7
- {&DDRH, &PINH, &PORTH, 5}, // H5 8
- {&DDRH, &PINH, &PORTH, 6}, // H6 9
- {&DDRB, &PINB, &PORTB, 4}, // B4 10
- {&DDRB, &PINB, &PORTB, 5}, // B5 11
- {&DDRB, &PINB, &PORTB, 6}, // B6 12
- {&DDRB, &PINB, &PORTB, 7}, // B7 13
- {&DDRJ, &PINJ, &PORTJ, 1}, // J1 14
- {&DDRJ, &PINJ, &PORTJ, 0}, // J0 15
- {&DDRH, &PINH, &PORTH, 1}, // H1 16
- {&DDRH, &PINH, &PORTH, 0}, // H0 17
- {&DDRD, &PIND, &PORTD, 3}, // D3 18
- {&DDRD, &PIND, &PORTD, 2}, // D2 19
- {&DDRD, &PIND, &PORTD, 1}, // D1 20
- {&DDRD, &PIND, &PORTD, 0}, // D0 21
- {&DDRA, &PINA, &PORTA, 0}, // A0 22
- {&DDRA, &PINA, &PORTA, 1}, // A1 23
- {&DDRA, &PINA, &PORTA, 2}, // A2 24
- {&DDRA, &PINA, &PORTA, 3}, // A3 25
- {&DDRA, &PINA, &PORTA, 4}, // A4 26
- {&DDRA, &PINA, &PORTA, 5}, // A5 27
- {&DDRA, &PINA, &PORTA, 6}, // A6 28
- {&DDRA, &PINA, &PORTA, 7}, // A7 29
- {&DDRC, &PINC, &PORTC, 7}, // C7 30
- {&DDRC, &PINC, &PORTC, 6}, // C6 31
- {&DDRC, &PINC, &PORTC, 5}, // C5 32
- {&DDRC, &PINC, &PORTC, 4}, // C4 33
- {&DDRC, &PINC, &PORTC, 3}, // C3 34
- {&DDRC, &PINC, &PORTC, 2}, // C2 35
- {&DDRC, &PINC, &PORTC, 1}, // C1 36
- {&DDRC, &PINC, &PORTC, 0}, // C0 37
- {&DDRD, &PIND, &PORTD, 7}, // D7 38
- {&DDRG, &PING, &PORTG, 2}, // G2 39
- {&DDRG, &PING, &PORTG, 1}, // G1 40
- {&DDRG, &PING, &PORTG, 0}, // G0 41
- {&DDRL, &PINL, &PORTL, 7}, // L7 42
- {&DDRL, &PINL, &PORTL, 6}, // L6 43
- {&DDRL, &PINL, &PORTL, 5}, // L5 44
- {&DDRL, &PINL, &PORTL, 4}, // L4 45
- {&DDRL, &PINL, &PORTL, 3}, // L3 46
- {&DDRL, &PINL, &PORTL, 2}, // L2 47
- {&DDRL, &PINL, &PORTL, 1}, // L1 48
- {&DDRL, &PINL, &PORTL, 0}, // L0 49
- {&DDRB, &PINB, &PORTB, 3}, // B3 50
- {&DDRB, &PINB, &PORTB, 2}, // B2 51
- {&DDRB, &PINB, &PORTB, 1}, // B1 52
- {&DDRB, &PINB, &PORTB, 0}, // B0 53
- {&DDRF, &PINF, &PORTF, 0}, // F0 54
- {&DDRF, &PINF, &PORTF, 1}, // F1 55
- {&DDRF, &PINF, &PORTF, 2}, // F2 56
- {&DDRF, &PINF, &PORTF, 3}, // F3 57
- {&DDRF, &PINF, &PORTF, 4}, // F4 58
- {&DDRF, &PINF, &PORTF, 5}, // F5 59
- {&DDRF, &PINF, &PORTF, 6}, // F6 60
- {&DDRF, &PINF, &PORTF, 7}, // F7 61
- {&DDRK, &PINK, &PORTK, 0}, // K0 62
- {&DDRK, &PINK, &PORTK, 1}, // K1 63
- {&DDRK, &PINK, &PORTK, 2}, // K2 64
- {&DDRK, &PINK, &PORTK, 3}, // K3 65
- {&DDRK, &PINK, &PORTK, 4}, // K4 66
- {&DDRK, &PINK, &PORTK, 5}, // K5 67
- {&DDRK, &PINK, &PORTK, 6}, // K6 68
- {&DDRK, &PINK, &PORTK, 7} // K7 69
-};
-//------------------------------------------------------------------------------
-#elif (defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && defined(CORE_MICRODUINO)
-// Microduino Core+
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 20;
-uint8_t const SCL_PIN = 21;
-
-// SPI port
-uint8_t const SS_PIN = 10;
-uint8_t const MOSI_PIN = 11;
-uint8_t const MISO_PIN = 12;
-uint8_t const SCK_PIN = 13;
-
-static const pin_map_t digitalPinMap[] = {
- {&DDRD, &PIND, &PORTD, 0}, // D0 PD0
- {&DDRD, &PIND, &PORTD, 1}, // D1 PD1
- {&DDRD, &PIND, &PORTD, 2}, // D2 PD2
- {&DDRD, &PIND, &PORTD, 3}, // D3 PD3
- {&DDRB, &PINB, &PORTB, 0}, // D4 PB0
- {&DDRB, &PINB, &PORTB, 1}, // D5 PB1
- {&DDRB, &PINB, &PORTB, 2}, // D6 PB2
- {&DDRB, &PINB, &PORTB, 3}, // D7 PB3
- {&DDRD, &PIND, &PORTD, 6}, // D8 PD6
- {&DDRD, &PIND, &PORTD, 5}, // D9 PD5
- {&DDRB, &PINB, &PORTB, 4}, // D10 PB4
- {&DDRB, &PINB, &PORTB, 5}, // D11 PB5
- {&DDRB, &PINB, &PORTB, 6}, // D12 PB6
- {&DDRB, &PINB, &PORTB, 7}, // D13 PB7
- {&DDRC, &PINC, &PORTC, 7}, // D14 PC7
- {&DDRC, &PINC, &PORTC, 6}, // D15 PC6
- {&DDRC, &PINC, &PORTC, 5}, // D16 PC5
- {&DDRC, &PINC, &PORTC, 4}, // D17 PC4
- {&DDRC, &PINC, &PORTC, 3}, // D18 PC3
- {&DDRC, &PINC, &PORTC, 2}, // D19 PC2
- {&DDRC, &PINC, &PORTC, 1}, // D20 PC1
- {&DDRC, &PINC, &PORTC, 0}, // D21 PC0
- {&DDRD, &PIND, &PORTD, 4}, // D22 PD4
- {&DDRD, &PIND, &PORTD, 7}, // D23 PD7
- {&DDRA, &PINA, &PORTA, 7}, // D24 PA7
- {&DDRA, &PINA, &PORTA, 6}, // D25 PA6
- {&DDRA, &PINA, &PORTA, 5}, // D26 PA5
- {&DDRA, &PINA, &PORTA, 4}, // D27 PA4
- {&DDRA, &PINA, &PORTA, 3}, // D28 PA3
- {&DDRA, &PINA, &PORTA, 2}, // D29 PA2
- {&DDRA, &PINA, &PORTA, 1}, // D30 PA1
- {&DDRA, &PINA, &PORTA, 0} // D31 PA0
-};
-//------------------------------------------------------------------------------
-#elif defined(__AVR_ATmega128RFA1__) && defined(CORE_MICRODUINO)
-// Microduino Core RF
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 18;
-uint8_t const SCL_PIN = 19;
-
-// SPI port
-uint8_t const SS_PIN = 10;
-uint8_t const MOSI_PIN = 11;
-uint8_t const MISO_PIN = 12;
-uint8_t const SCK_PIN = 13;
-
-static const pin_map_t digitalPinMap[] = {
- {&DDRD, &PINE, &PORTE, 0}, // D0 PE0
- {&DDRD, &PINE, &PORTE, 1}, // D1 PE1
- {&DDRD, &PIND, &PORTD, 2}, // D2 PD2
- {&DDRD, &PIND, &PORTD, 3}, // D3 PD3
- {&DDRB, &PINE, &PORTE, 3}, // D4 PE3
- {&DDRB, &PINE, &PORTE, 4}, // D5 PE4
- {&DDRB, &PINE, &PORTE, 5}, // D6 PE5
- {&DDRB, &PINB, &PORTB, 7}, // D7 PB7
- {&DDRD, &PINB, &PORTB, 6}, // D8 PB6
- {&DDRD, &PINB, &PORTB, 5}, // D9 PB5
- {&DDRB, &PINB, &PORTB, 4}, // D10 PB4
- {&DDRB, &PINB, &PORTB, 2}, // D11 PB2
- {&DDRB, &PINB, &PORTB, 3}, // D12 PB3
- {&DDRB, &PINB, &PORTB, 1}, // D13 PB1
- {&DDRF, &PINF, &PORTF, 7}, // D14 PF7
- {&DDRF, &PINF, &PORTF, 6}, // D15 PF6
- {&DDRF, &PINF, &PORTF, 5}, // D16 PF5
- {&DDRF, &PINF, &PORTF, 4}, // D17 PF4
- {&DDRD, &PIND, &PORTD, 1}, // D18 PD1
- {&DDRD, &PIND, &PORTD, 0}, // D19 PD0
- {&DDRF, &PINF, &PORTF, 3}, // D20 PF3
- {&DDRF, &PINF, &PORTF, 2}, // D21 PF2
-};
-//------------------------------------------------------------------------------
-#elif defined(__AVR_ATmega32U4__) && defined(CORE_MICRODUINO)
-// Microduino Core USB
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 18;
-uint8_t const SCL_PIN = 19;
-
-// SPI port
-uint8_t const SS_PIN = 10;
-uint8_t const MOSI_PIN = 11;
-uint8_t const MISO_PIN = 12;
-uint8_t const SCK_PIN = 13;
-
-static const pin_map_t digitalPinMap[] = {
- {&DDRD, &PIND, &PORTD, 2}, // D0 - PD2
- {&DDRD, &PIND, &PORTD, 3}, // D1 - PD3
- {&DDRE, &PINE, &PORTE, 6}, // D2 - PE6
- {&DDRD, &PIND, &PORTD, 6}, // D3 - PD6
- {&DDRD, &PIND, &PORTD, 7}, // D4 - PD7
- {&DDRC, &PINC, &PORTC, 6}, // D5 - PC6
- {&DDRC, &PINC, &PORTC, 7}, // D6 - PC7
- {&DDRE, &PINE, &PORTE, 7}, // D7 - PE7
- {&DDRB, &PINB, &PORTB, 6}, // D8 - PB6
- {&DDRB, &PINB, &PORTB, 5}, // D9 - PB5
- {&DDRB, &PINB, &PORTB, 0}, // D10 - PB0
- {&DDRB, &PINB, &PORTB, 2}, // D11 - MOSI - PB2
- {&DDRB, &PINB, &PORTB, 3}, // D12 -MISO - PB3
- {&DDRB, &PINB, &PORTB, 1}, // D13 -SCK - PB1
- {&DDRF, &PINF, &PORTF, 7}, // D14 - A0 - PF7
- {&DDRF, &PINF, &PORTF, 6}, // D15 - A1 - PF6
- {&DDRF, &PINF, &PORTF, 5}, // D16 - A2 - PF5
- {&DDRF, &PINF, &PORTF, 4}, // D17 - A3 - PF4
- {&DDRD, &PIND, &PORTD, 1}, // D18 - PD1
- {&DDRD, &PIND, &PORTD, 0}, // D19 - PD0
- {&DDRF, &PINF, &PORTF, 1}, // D20 - A6 - PF1
- {&DDRF, &PINF, &PORTF, 0}, // D21 - A7 - PF0
-};
-//------------------------------------------------------------------------------
-#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
-// Sanguino
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 17;
-uint8_t const SCL_PIN = 18;
-
-// SPI port
-uint8_t const SS_PIN = 4;
-uint8_t const MOSI_PIN = 5;
-uint8_t const MISO_PIN = 6;
-uint8_t const SCK_PIN = 7;
-
-static const pin_map_t digitalPinMap[] = {
- {&DDRB, &PINB, &PORTB, 0}, // B0 0
- {&DDRB, &PINB, &PORTB, 1}, // B1 1
- {&DDRB, &PINB, &PORTB, 2}, // B2 2
- {&DDRB, &PINB, &PORTB, 3}, // B3 3
- {&DDRB, &PINB, &PORTB, 4}, // B4 4
- {&DDRB, &PINB, &PORTB, 5}, // B5 5
- {&DDRB, &PINB, &PORTB, 6}, // B6 6
- {&DDRB, &PINB, &PORTB, 7}, // B7 7
- {&DDRD, &PIND, &PORTD, 0}, // D0 8
- {&DDRD, &PIND, &PORTD, 1}, // D1 9
- {&DDRD, &PIND, &PORTD, 2}, // D2 10
- {&DDRD, &PIND, &PORTD, 3}, // D3 11
- {&DDRD, &PIND, &PORTD, 4}, // D4 12
- {&DDRD, &PIND, &PORTD, 5}, // D5 13
- {&DDRD, &PIND, &PORTD, 6}, // D6 14
- {&DDRD, &PIND, &PORTD, 7}, // D7 15
- {&DDRC, &PINC, &PORTC, 0}, // C0 16
- {&DDRC, &PINC, &PORTC, 1}, // C1 17
- {&DDRC, &PINC, &PORTC, 2}, // C2 18
- {&DDRC, &PINC, &PORTC, 3}, // C3 19
- {&DDRC, &PINC, &PORTC, 4}, // C4 20
- {&DDRC, &PINC, &PORTC, 5}, // C5 21
- {&DDRC, &PINC, &PORTC, 6}, // C6 22
- {&DDRC, &PINC, &PORTC, 7}, // C7 23
- {&DDRA, &PINA, &PORTA, 7}, // A7 24
- {&DDRA, &PINA, &PORTA, 6}, // A6 25
- {&DDRA, &PINA, &PORTA, 5}, // A5 26
- {&DDRA, &PINA, &PORTA, 4}, // A4 27
- {&DDRA, &PINA, &PORTA, 3}, // A3 28
- {&DDRA, &PINA, &PORTA, 2}, // A2 29
- {&DDRA, &PINA, &PORTA, 1}, // A1 30
- {&DDRA, &PINA, &PORTA, 0} // A0 31
-};
-//------------------------------------------------------------------------------
-#elif defined(__AVR_ATmega32U4__)
-// Leonardo
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 2;
-uint8_t const SCL_PIN = 3;
-
-// SPI port
-uint8_t const SS_PIN = 17;
-uint8_t const MOSI_PIN = 16;
-uint8_t const MISO_PIN = 14;
-uint8_t const SCK_PIN = 15;
-
-static const pin_map_t digitalPinMap[] = {
- {&DDRD, &PIND, &PORTD, 2}, // D2 0
- {&DDRD, &PIND, &PORTD, 3}, // D3 1
- {&DDRD, &PIND, &PORTD, 1}, // D1 2
- {&DDRD, &PIND, &PORTD, 0}, // D0 3
- {&DDRD, &PIND, &PORTD, 4}, // D4 4
- {&DDRC, &PINC, &PORTC, 6}, // C6 5
- {&DDRD, &PIND, &PORTD, 7}, // D7 6
- {&DDRE, &PINE, &PORTE, 6}, // E6 7
- {&DDRB, &PINB, &PORTB, 4}, // B4 8
- {&DDRB, &PINB, &PORTB, 5}, // B5 9
- {&DDRB, &PINB, &PORTB, 6}, // B6 10
- {&DDRB, &PINB, &PORTB, 7}, // B7 11
- {&DDRD, &PIND, &PORTD, 6}, // D6 12
- {&DDRC, &PINC, &PORTC, 7}, // C7 13
- {&DDRB, &PINB, &PORTB, 3}, // B3 14
- {&DDRB, &PINB, &PORTB, 1}, // B1 15
- {&DDRB, &PINB, &PORTB, 2}, // B2 16
- {&DDRB, &PINB, &PORTB, 0}, // B0 17
- {&DDRF, &PINF, &PORTF, 7}, // F7 18
- {&DDRF, &PINF, &PORTF, 6}, // F6 19
- {&DDRF, &PINF, &PORTF, 5}, // F5 20
- {&DDRF, &PINF, &PORTF, 4}, // F4 21
- {&DDRF, &PINF, &PORTF, 1}, // F1 22
- {&DDRF, &PINF, &PORTF, 0}, // F0 23
-};
-//------------------------------------------------------------------------------
-#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-// Teensy++ 1.0 & 2.0
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 1;
-uint8_t const SCL_PIN = 0;
-
-// SPI port
-uint8_t const SS_PIN = 20;
-uint8_t const MOSI_PIN = 22;
-uint8_t const MISO_PIN = 23;
-uint8_t const SCK_PIN = 21;
-
-static const pin_map_t digitalPinMap[] = {
- {&DDRD, &PIND, &PORTD, 0}, // D0 0
- {&DDRD, &PIND, &PORTD, 1}, // D1 1
- {&DDRD, &PIND, &PORTD, 2}, // D2 2
- {&DDRD, &PIND, &PORTD, 3}, // D3 3
- {&DDRD, &PIND, &PORTD, 4}, // D4 4
- {&DDRD, &PIND, &PORTD, 5}, // D5 5
- {&DDRD, &PIND, &PORTD, 6}, // D6 6
- {&DDRD, &PIND, &PORTD, 7}, // D7 7
- {&DDRE, &PINE, &PORTE, 0}, // E0 8
- {&DDRE, &PINE, &PORTE, 1}, // E1 9
- {&DDRC, &PINC, &PORTC, 0}, // C0 10
- {&DDRC, &PINC, &PORTC, 1}, // C1 11
- {&DDRC, &PINC, &PORTC, 2}, // C2 12
- {&DDRC, &PINC, &PORTC, 3}, // C3 13
- {&DDRC, &PINC, &PORTC, 4}, // C4 14
- {&DDRC, &PINC, &PORTC, 5}, // C5 15
- {&DDRC, &PINC, &PORTC, 6}, // C6 16
- {&DDRC, &PINC, &PORTC, 7}, // C7 17
- {&DDRE, &PINE, &PORTE, 6}, // E6 18
- {&DDRE, &PINE, &PORTE, 7}, // E7 19
- {&DDRB, &PINB, &PORTB, 0}, // B0 20
- {&DDRB, &PINB, &PORTB, 1}, // B1 21
- {&DDRB, &PINB, &PORTB, 2}, // B2 22
- {&DDRB, &PINB, &PORTB, 3}, // B3 23
- {&DDRB, &PINB, &PORTB, 4}, // B4 24
- {&DDRB, &PINB, &PORTB, 5}, // B5 25
- {&DDRB, &PINB, &PORTB, 6}, // B6 26
- {&DDRB, &PINB, &PORTB, 7}, // B7 27
- {&DDRA, &PINA, &PORTA, 0}, // A0 28
- {&DDRA, &PINA, &PORTA, 1}, // A1 29
- {&DDRA, &PINA, &PORTA, 2}, // A2 30
- {&DDRA, &PINA, &PORTA, 3}, // A3 31
- {&DDRA, &PINA, &PORTA, 4}, // A4 32
- {&DDRA, &PINA, &PORTA, 5}, // A5 33
- {&DDRA, &PINA, &PORTA, 6}, // A6 34
- {&DDRA, &PINA, &PORTA, 7}, // A7 35
- {&DDRE, &PINE, &PORTE, 4}, // E4 36
- {&DDRE, &PINE, &PORTE, 5}, // E5 37
- {&DDRF, &PINF, &PORTF, 0}, // F0 38
- {&DDRF, &PINF, &PORTF, 1}, // F1 39
- {&DDRF, &PINF, &PORTF, 2}, // F2 40
- {&DDRF, &PINF, &PORTF, 3}, // F3 41
- {&DDRF, &PINF, &PORTF, 4}, // F4 42
- {&DDRF, &PINF, &PORTF, 5}, // F5 43
- {&DDRF, &PINF, &PORTF, 6}, // F6 44
- {&DDRF, &PINF, &PORTF, 7} // F7 45
-};
-//------------------------------------------------------------------------------
-#else // defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-// 168 and 328 Arduinos
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 18;
-uint8_t const SCL_PIN = 19;
-
-// SPI port
-uint8_t const SS_PIN = 10;
-uint8_t const MOSI_PIN = 11;
-uint8_t const MISO_PIN = 12;
-uint8_t const SCK_PIN = 13;
-
-static const pin_map_t digitalPinMap[] = {
- {&DDRD, &PIND, &PORTD, 0}, // D0 0
- {&DDRD, &PIND, &PORTD, 1}, // D1 1
- {&DDRD, &PIND, &PORTD, 2}, // D2 2
- {&DDRD, &PIND, &PORTD, 3}, // D3 3
- {&DDRD, &PIND, &PORTD, 4}, // D4 4
- {&DDRD, &PIND, &PORTD, 5}, // D5 5
- {&DDRD, &PIND, &PORTD, 6}, // D6 6
- {&DDRD, &PIND, &PORTD, 7}, // D7 7
- {&DDRB, &PINB, &PORTB, 0}, // B0 8
- {&DDRB, &PINB, &PORTB, 1}, // B1 9
- {&DDRB, &PINB, &PORTB, 2}, // B2 10
- {&DDRB, &PINB, &PORTB, 3}, // B3 11
- {&DDRB, &PINB, &PORTB, 4}, // B4 12
- {&DDRB, &PINB, &PORTB, 5}, // B5 13
- {&DDRC, &PINC, &PORTC, 0}, // C0 14
- {&DDRC, &PINC, &PORTC, 1}, // C1 15
- {&DDRC, &PINC, &PORTC, 2}, // C2 16
- {&DDRC, &PINC, &PORTC, 3}, // C3 17
- {&DDRC, &PINC, &PORTC, 4}, // C4 18
- {&DDRC, &PINC, &PORTC, 5} // C5 19
-};
-#endif // defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-//------------------------------------------------------------------------------
-static const uint8_t digitalPinCount = sizeof(digitalPinMap) / sizeof(pin_map_t);
-
-uint8_t badPinNumber(void)
-__attribute__((error("Pin number is too large or not a constant")));
-
-static inline __attribute__((always_inline))
-uint8_t getPinMode(uint8_t pin) {
- if (__builtin_constant_p(pin) && pin < digitalPinCount) {
- return (*digitalPinMap[pin].ddr >> digitalPinMap[pin].bit) & 1;
- } else {
- return badPinNumber();
- }
-}
-static inline __attribute__((always_inline))
-void setPinMode(uint8_t pin, uint8_t mode) {
- if (__builtin_constant_p(pin) && pin < digitalPinCount) {
- if (mode) {
- *digitalPinMap[pin].ddr |= 1 << digitalPinMap[pin].bit;
- } else {
- *digitalPinMap[pin].ddr &= ~(1 << digitalPinMap[pin].bit);
- }
- } else {
- badPinNumber();
- }
-}
-static inline __attribute__((always_inline))
-uint8_t fastDigitalRead(uint8_t pin) {
- if (__builtin_constant_p(pin) && pin < digitalPinCount) {
- return (*digitalPinMap[pin].pin >> digitalPinMap[pin].bit) & 1;
- } else {
- return badPinNumber();
- }
-}
-static inline __attribute__((always_inline))
-void fastDigitalWrite(uint8_t pin, uint8_t value) {
- if (__builtin_constant_p(pin) && pin < digitalPinCount) {
- if (value) {
- *digitalPinMap[pin].port |= 1 << digitalPinMap[pin].bit;
- } else {
- *digitalPinMap[pin].port &= ~(1 << digitalPinMap[pin].bit);
- }
- } else {
- badPinNumber();
- }
-}
-#endif // Sd2PinMap_h
-
-#elif defined (__CPU_ARC__)
-
-#if defined (__ARDUINO_ARC__)
- // Two Wire (aka I2C) ports
- uint8_t const SDA_PIN = 18;
- uint8_t const SCL_PIN = 19;
-
- // SPI port
- uint8_t const SS_PIN = 10;
- uint8_t const MOSI_PIN = 11;
- uint8_t const MISO_PIN = 12;
- uint8_t const SCK_PIN = 13;
-
-#endif // Arduino ARC
-
-#else
-#error Architecture or board not supported.
-#endif